Surgical C-arm system

ANYVIEW DR Series

Innovative Surgical Mobile C-arm

Specifications

Model Name			Anyview-240DR	Anyview-320DR	Anyview-500DR
System power requirement	Line voltage		220-230V 50/60Hz	220-230V 50/60Hz	220-230V 50/60Hz
	Line phase		Single	Single	Single
X-ray Generator	Type		HFG INVERTER	HFG INVERTER	HFG INVERTER
	Output power		2.4kW	3.2kW	5kW
	Fluoroscopy	Continuous mode	0.5-10mA	0.5-10mA	0.5-10mA
		Pulsed mode	0.5-20mA	0.5-20mA	0.5-20mA
		Boost mode	30mA	30mA	30mA
		ABS mode	YES	YES	YES
	Radiography mode	kV range	40-110kV	40-110kV	40-125kV
		mA range	16-30	15-40	20-100
		mAs range	0.8-100mAs	0.8-100mAs	0.8-200mAs
X-ray tube	Anode type		Rotating
	Max kV		125kV
	Focal spot	Small	0.3mm
		Large	0.6mm
	Target angle		10º
	Anode heat storage capacity		210kHU
Collimator	Type		Motorized
	Opening/Closing		2 way
	Rotation		360º
	Iris		Motorized
Flat Panel Detector	Field of View		12inch x 12inch (2048x2048pixels)
	Image Sensor		TFT: a-Si (Amorphous Silicon)
	X-ray Scintillator Type		Csl: Tl (Thallium doped Cesium Iodide)
	Pixel Pitch		0.145mm
	Spatial Resolution		Minimum 3.4lp/mm
	Maximum Frame rate		Full Size (2048x2048): 14fps / 2x2 Binning (1024x1024): 30fps
Monitor (Included by Monitor stand)	Type		TFT-LCD DUAL
	Size(inch)		19
	q'ty		2
Digital Imaging System (DIS)	Type		AIS
	PC Spec		Intel Core i3-2130 (3.4GHz) or Higher Windows 7 or Higher 4GB DDR3 SDRAM (1600MHz) or Higher 500GByte Hard-Drive or higher
Option	Dose Area Meter		YES
	Digital Imaging system with PACS		YES